(dng)ǰλã
кdI(y)h(hun)Ƽ˾ >
a(chn)Ʒ >
һƷĤM > ձ|l(wi)(j)ˮĤSUL-G20STF(xin)؛(yng)
ձ|l(wi)(j)ˮĤSUL-G20STF(xin)؛(yng)
a(chn)Ʒ̖(ho) |
SUL-G20ST |
Ʒ ƣ |
| |
|
أ |
V|ڌ^(q) |
ڣ |
2024-11-16 |
| VĤBĤ | | Ʒ| | | mÌ(du)ˎҺ | |
| ;ˎҺ^(gu)V | | Ҏ(gu)8040 | | 1.2 | |
| m÷ˮ | | ^(gu)Vʽ(ni)ʽ | | ;͉A | |
| 1.6 Mpa | | ض1-45 | | ^(gu)V0.01 | |
| 10 f(wn) | | 0.01 m | | ͨ1000 L/H | |
| v(qing)1.6 Mpa | | ̖(ho)SUL-G20ST | | Ĥe400M2 | |
| ؛F(xin)؛ | | ؛1000 | | a(chn)ձ | |
| a(chn)ˮ500L/H | | ؛1000 | | a(chn)ձ | |
F(xin)؛(yng)ձ|l(wi)(j)ˮĤSUL-G20ST
ھԃQQ:--- С㣺
ձ|l(wi)(j)ˮĤSUL-G20ST
Salt Rejection:99.5%;Product Flow Rate:30m3/day (7900gpd)
1. Test Conditionsձ|l(wi)(j)ˮĤSUL-G20ST
Feed Water Pressure 0.75 MPa (110 psi)
Feed Water Temperature 25 °C (77 °F)
Feed Water Concentration 500 mg/ as NaCl
Brine Flow Rate 80 /min. (5.3 gpm)
Feed Water pH 6.5
2. 99.0 % minimum*ձ|l(wi)(j)ˮĤSUL-G20ST
3. 24 m3/day (1100 gpd) minimum* *For any single element
ձ|l(wi)(j)ˮĤSUL-G20ST
Design Conditions
Feed Water Pressure 1.0 MPa (150 psi)
Feed Water Temperature 35 °C (95 °F)
Feed Water Turbidity ( SDI ) 4
Feed Water pH Range, Continuous Operation 3-9
Feed Water pH Range, Chemical Cleaning 2-11
Feed Flow Rate per Vessel 200/min. (52 gpm)
Brine Flow Rate per Vessel 40/min. (11 gpm)
Brine/Permeate Flow Ratio6ձ|l(wi)(j)ˮĤSUL-G20ST
Pressure Drop ( per Element ) 0.10 MPa (14 psi)
Pressure Drop ( per Vessel ) 0.20 MPa (29 psi)
˾߀(yng)a(chn)Ʒͬa(chn)ƷSUL-G10TS,SUL-G10,SUL-G20F
ձ|l(wi)(j)ˮĤSUL-G20ST